Hot Water Canterbury Bankstown

This customer in Burraneer contacted our hot water team after their existing Bosch instantaneous gas hot water system failed. The system was indoors, old, had developed reliability issues and replacement parts had become increasingly difficult to find. This made repairing it more expensive than it needed to be.

Assessing the Best Hot Water Replacement Option

Following an assessment, our team initially recommended replacing the Bosch unit with a new Rinnai internal gas instantaneous hot water system. However, the customer was concerned about the overall price. Internal gas units are considerably more expensive than their external counterparts due to their design and installation requirements. This increases the replacement cost by approximately 50%.

The customer asked if there was a more cost-effective alternative and we proposed installing an external Rinnai instantaneous hot water system on an exterior wall of the property. Although this required the installation of new hot water, cold water, and gas pipework, the overall cost remained significantly lower than replacing the system with another internal model.

The Installation Process

To achieve a neat and professional finish, the new services were routed internally through the garage before exiting to the external installation location. A licensed electrician installed a dedicated outdoor power supply to suit the new appliance, and the installation was completed in full compliance with the manufacturer’s requirements.

The customer was extremely pleased with the outcome. The completed installation provided a reliable, modern hot water system with neatly concealed pipework, while also delivering an estimated saving of approximately $2,000 compared with installing a new internal unit.

This homeowner in Lilli Pilli called our hot water team to discuss why they had no hot water. This was caused by a failed roof-mounted solar system. The unit was severely corroded and beyond repair

How We Solved The Problem

Our team of hot water technicians thoroughly inspected the roof and the solar system, confirming that the only option was to completely replace it. At this stage, it was more cost-effective than trying to repair the system.

Our Solution

We recommended upgrading to an air source heat pump system over another solar system. This was due to the high additional cost of purchasing and installing a brand-new solar system. Roof-mounted solar systems are also difficult to service and can rack up expensive running costs during rainy, cloudy weather.

This heat pump can run virtually free of charge if there are already PV solar panels installed, but they also run incredibly effectively if there aren't any solar panels, so it's a win-win situation. This new system is also mounted on the ground, making it easier to access when it comes time to perform maintenance and repairs.

Another bonus is that there are several government rebates and schemes available when switching to heat pump systems. This helps reduce the overall initial cost of the unit.

If you need to upgrade or replace your hot water system, call our experienced technicians on 0488 801 008 or fill out our online booking form today.

Late on a Friday afternoon, our specialised plumbing team were called to a Miranda rental property to investigate a broken hot water system. We know how important reliable hot water systems are, especially in tenanted properties, which is why our plumbers made this call a priority.

Diagnosis: The Electric Hot Water System Is Leaking

Upon further inspection, our plumbers identified a small leak in the hot water unit. This leak allowed water to reach the internal electrical components, resulting in the circuit breaker tripping and causing the hot water to fail.

This home's hot water system was a Rheem 315-litre electric storage tank, originally made in 2014. At 12 years old, this unit had reached the end of its service lifespan, making a replacement the most cost-effective and reliable solution.

Quoting and Approval Process

As this job was conducted on a rental property, we had to contact the managing agent. Over the phone, we outlined the issue with the hot water system and provided a quote for a replacement unit. In this quote, three replacement options were offered, each with different performances and prices. The owner selected a similar unit to the Rheem one.

Quick Installation Services

Once approved, our team got to work installing the new hot water system, installing it with minimal disruption. The Miranda home's hot water was restored the next morning.

Our plumbing team were called to a home in Gymea to investigate a Rheem gas hot water system. The homeowners were getting frustrated with the positioning of the hot water system and they weren't able to install a fold-down washing line due to the unit blocking it.

To resolve this, the homeowners wanted to replace their bulky Rheem system with a compact Rinnai 26L instantaneous hot water system. This system is approximately one-seventh of the size of the original unit, providing a sleek and less obstructive design.

We keep the installation process Neat and Tidy

During this job, the homeowner emphasised that it was incredibly important for the installation to be neat, particularly in how the pipes were positioned and attached to the wall. To achieve a clean and tidy finish, sections of the brick wall were carefully removed to allow the pipe connections to sit within the wall cavity, leaving them flush with the surface of the brickwork.

All works were completed to a high standard, and the outcome successfully addressed the client’s space constraints.

The new system also provides continuous hot water, subject to a constant gas and electrical supply.