Plumber Bankstown

Before our plumbers started to dig, they conducted a thorough site inspection to calculate the flow rate for staff and fire protection systems. We then created a 100 metre trench to facilitate the installation of the new underground systems.

To transition from the street mains into the building, we performed precision core drilling through thick concrete foundations and structural walls.

Internally, we utilised a tiered piping strategy:

• Potable Water Systems: We installed high-grade copper pipework suspended from the building purlins using engineered brackets to supply staff amenities.

• Fire Hydrant System: For the primary fire mains, we used Victaulic steel pipework. The grooved mechanical jointing system of Victaulic allows for slight vibration and thermal expansion, which is essential in large industrial sheds like this property. We used electrofusion welding to join these sections. This process uses an electric current to melt the pipe and fitting together, creating a singular joint that is actually stronger than the pipe itself. 

• External Fire Protection: We installed external fire sprinklers, specifically known as drenchers, over glazed sections of the building. These are designed to create a water curtain, protecting the building interior from radiant heat from neighbouring properties.

For the underground main system, we moved away from traditional materials and selected 125mm MDPE (Medium Density Polyethylene). This flexible piping is specifically designed to withstand high-pressure water and gas flow. MDPE is also resistant to soil acidity and corrosion, which takes into account Mascot's acidic soil due to its industrial history.

In addition, two 65mm MDPE lines were installed to service the potable water supply and fire hose reel system.

After completion, all systems were tested and commissioned upon completion to ensure full operational compliance.

The plumbing team at Everyday Plumbing were called out to a strata complex of villas in Kirrawee. This complex of villas had been experiencing multiple burst pipes and it was causing issues for the residents. Our testing revealed the pressure was over 1100kpa - AS3500 states a maximum pressure of 500kpa to domestic residence. The main water meter 32mm water frozen with liquid nitrogen, slightly relocated (to create additional room) modified with new isolation valve and and pressure reduction valve was installed. This resolved the complexes issues and brought the pressure within limits.

Our Assessment Of The Pipes

When dealing with repeated burst pipes, it's important to look beyond the initial damage and assess the condition of the entire system. Our plumbers carried out a detailed inspection of the affected areas and reviewed the history of recent pipe failures throughout the complex.

Recurring burst pipes can often be linked to factors like:

• Aging infrastructure 
• Corrosion
• Excessively high water pressure
• Environmental factors like ground movement
• Hidden leaks

Developing a Cost-Effective Solution

Rather than reacting to each burst pipe when they happen, our plumbers worked together to come up with a proactive plumbing strategy. Our recommendations focused on improving the reliability of the complex's water infrastructure while helping to minimise future maintenance costs and emergency call-outs.

Our plan considered:

• The age and condition of the villa's existing pipes and plumbing systems
• Long-term maintenance needs
• Minimising disruption to the residents
• Reducing future burst pipes
• Protecting the complex and the villas from water damage

Once we had assessed the plumbing, we installed a pressure-reducing valve. This valve is used to lower and stabilise incoming water pressure, protecting the complex's plumbing from dangerously high pressure.

The Result

By using our advanced tools to investigate the underlying causes of the repeated burst pipes, Everday Plumbing delivered a long-lasting and effective solution.

Our plumbers were called to a major water leak beneath Mandible Street in Alexandria. There was water all over the centre of the road and Sydney Water had advised us that it was likely coming from a fire service pipe. Since these pipes are used only for firefighting and rarely inspected, they tend to corrode over time, leading to underground failures and leaks with little to no warning.

As Mandile Street is a busy road and is a mix of residential and commercial areas, the local council required us to complete all work at night to manage safety and traffic flow.

What Our Plumbers Found

Once our plumbers shut down the water supply and exposed the leaking pipe using their non-destructive digging techniques, they discovered that the pipe was severely corroded. The corrosion was so severe that repairs would be impractical, so a full replacement was needed.

Our plumbers got to work, replacing 25 metres of steel pipe from the connection point on the opposite side of the road to the building. We also upsized the copper pipe to allow for a higher rate of water flow in the future as the area grows.

How the Work Was Completed

Works were carried out over multiple nights and included:

• Saw cutting and excavation
• Removing the damaged pipe
• Installing new copper pipework
• Installing hydrants and backflow devices
• Backfilling and restoring the roadway

If you're dealing with an underground leak or can't figure out where the leak is coming from, call our professional plumbers on  (02) 9191 7309 or fill out our online enquiry form today.

Our plumbers were called to this commercial crane operating worksite in business in Taren Point to talk through a bathroom fit-out. The existing bathrooms were located on the ground floor, adjacent to the workshop area and were used by all of the male staff. However, the upstairs office is used by both men and women employees, but doesn't have a dedicated toilet.

Following concerns raised by their staff, our client made the decision to install a female-only bathroom in the office upstairs, instantly improving accessibility and comfort. The new bathroom fit-out would include a hand basin and other associated amenities.

Plumbing Installation For The New Commercial Bathroom Fit-Out

After chatting with the owner about their needs and budget, our team of commercial plumbers got to work inspecting and cleaning the new space. Our plumbers also took a look at the existing bathroom downstairs to match the colours and aesthetics.

The job included:

• Installing a strong drainage system for the new upstairs bathroom
• Installing a hand sink and running hot and cold water to it
• Ensuring the floor waste system is installed correctly and is compliant
• Preparing all of the plumbing infrastructure for future trades, including tiling, plastering, painting and electrical fit-outs to finalise the bathroom installation.

All of our plumbing work was finished in accordance with the latest Australian standards for commercial plumbing and workplace amenities, ensuring this bathroom is reliable and will work for years to come.

The result is a modern, functional bathroom space that enhances workplace conditions and meets the needs of all staff.

If your workplace needs to install a new bathroom or toilet or needs a total commercial fit out, don't hesitate to call us on 02 9191 7309 or complete our online booking form today.